Catamaranparts.nl BLADE
Voltastraat 5
2041 CK Zandvoort
Tel +31 23 573 85 65
Mail info@catamaranparts.nl
SAILING ON THE EDGE
One of the two major builders of the Blade F16 hull is the US building company VectorWorks Marine. The design made by
Phill Brander is build for Catamaranparts by VWM on special order requirements.
The hulls are standard fiberglass sandwich foam build which is giving a very strong hull.The white colored hulls is the standard but
a color is also possible.
The spinaker ring is alu made with a pentex cloth bag which
gives less resitans when working with the spinaker
The alu ring has also a good durability when the boat is most
of the time outside.in a salty environement.
The selftacting jib mounted
on the frontbeam is easy
to use and gives a comfort
switch when you change
from one to two up
All aluminium parts are annodised so this
gives maximum protection to corrosion
The ruddersystem is produced
by Catamaranparts.The full carbon boards
together with aluminium stocks gives a light
and strong combination.
A drain plug can be installed if requested by the
customer.
Boat dimensions:
Length 5.00 m
Width 2,50 m
Mast length 8,50 m
Mainsail area 15 m2
Jib area 3,7 m2
Spinaker area 17,5 m2
Total weight ~110 kg